By 
A noisy garage door is irritating and signals an underlying issue that requires attention. You use several proven methods to silence that squeaky door and bring tranquillity back to your home. The first step in resolving the noise is pinpointing its cause. Let’s explore some practical strategies to hush that noisy door.
Lubricate the moving parts
The effective way to quiet a noisy garage door is to lubricate the moving parts properly. This includes the rollers, hinges, and any other metal components that come into contact with the track.
Disconnect the garage door opener to ensure the door is not powered while you work.
Clean the rollers, hinges, and other moving parts with a degreasing agent to remove any built-up grime or debris.
Apply a high-quality garage door lubricant or silicone-based spray to the rollers, hinges, and other moving parts. Be sure to follow the manufacturer’s instructions for application.
Wipe away any excess lubricant to prevent it from attracting dirt and dust.
Reconnect the garage door opener and test the door’s operation.
Regularly lubricating your garage door’s moving parts (typically every 6-12 months) can help prevent future noise and keep your door running smoothly.
Tighten loose hardware
If the noisy garage door is caused by loose hardware, such as screws or bolts, it’s essential to tighten them up to eliminate any rattling or vibrating.
Inspect the garage door system, including the hinges, rollers, and brackets or supports, to identify any loose hardware.
Using the appropriate tools, tighten each bolt, screw, or nut, being careful not to overtighten them.
Pay special attention to the hinges, as these are familiar noise sources if they become loose.
Once all the hardware is tightened, test the door’s operation and listen for any remaining noise.
If you find that the hardware continues to come loose over time, consider replacing worn-out parts or seeking the help of a professional garage door repair service.
Align the garage door track
If the garage door track is misaligned, it can cause the door to rub against the track, leading to a noisy operation. Aligning the track is more involved, but it can effectively solve a noisy garage door.
Disconnect the garage door opener to allow full track access.
Carefully inspect the track for any bends, kinks, or other signs of damage. If you find any, you may need to replace the entire track.
Use a level to ensure the track is aligned vertically and horizontally. Adjust the track as needed, making small incremental changes.
Tighten all the mounting hardware, such as lag screws or bolts, to secure the track in its new position.
Reconnect the garage door opener and test the door’s operation, listening for any remaining noise.
If you’re uncomfortable adjusting the track, it’s best to call a professional garage door repair service to ensure the job is done correctly and safely. For Garage Door Repair visit ashburngaragedoorsrepair.us.
Comments